Then Press and hold “Home + Power + Volume Up” buttons for a few seconds and as soon as you see your device’ logo on-screen, release three buttons altogether. How to boot a Samsung Galaxy Device into TWRP recovery Done!!! TWRP is now installed on your device. Your device will automatically reboot when Odin is done flashing. Once it finished successfully, a pass message on the Odin screen will pop up. Click the Start button on Odin to start Flashing and wait for it to finish the process. 
Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
The Odin will automatically detect the device and show an “Added!!” message.If not then your device is not connected properly
Once your device is in download mode, connect it to the PC with a USB cable. Press Volume Up on the warning screen to accept it and boot into Download mode. Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen. Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below. Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON. Go back to the main Settings page, scroll to bottom and select “Developer options” from there. Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”. (If applicable) Enable OEM unlock: ( Enable OEM unlock” feature Only for Galaxy Note 5 and Galaxy S6 edge+ devices). 
Make sure you’ve downloaded The Odin flashable TWRP recovery. (Download the latest odin, unzip and run) Now Run Odin3 vxxx.exe file from the extracted files on your PC. 
After downloading, Unzip the latest Odin xxx. Now download the Latest Odin File from the download section above. First Of all, read the Pre-Requirement Section Carefully.
0 kommentar(er)
